The bathroom is a place for cleaning, but it is always surprising how dirty it can get! The combination of soap, water and the varying products that people use results in soap scum, limescale, mildew and all sorts of other mess if not cleaned regularly. If you want to attack your bathroom in the proper way, you are going to need to get elbow deep in it, and ensure that you do it regularly. If allowed, the dirt in the bathroom can get right out of control, and for this reason regular cleaning is a must, as otherwise the level of finish that you will be able to achieve will diminish, until the bathroom looks rough round the edges, even when you have cleaned it well. Regularity is key to shiny taps, glistening surfaces and beautiful fittings, so get on it!
First off, clear the room out! Get rid of bottles of product and the like, and throw away anything that is empty. Clearing the room first will mean that you are able to focus on cleaning, rather than keeping teetering piles of packings and products from falling down! Before you replace them at a later point in the process, you must give them a quick rinse, as it is residue from these bottles that will be contributing to the further dirtying of the surfaces in the bathroom.
Next spray down all of the surfaces with bathroom cleaner. If you have a really bad limescale problem with the taps and the like, it is worth spraying them down with vinegar the night before, and wrapping cling film around them, to keep the acidic vinegar in contact with the metal. This will mean that the night is spent with the vinegar eating away at the build up, and you will almost be able to rinse it off by the morning. Otherwise, spray it down with bathroom cleaner, going round the whole room, and starting with the section of the room that you sprayed first, to ensure that the chemicals in the bathroom cleaner have enough time to get to work.
Having scrubbed all of the surfaces clean, you may want to dust a little in the corners of the room, to be sure that everything is completely set. Then bleach the toilet, with the brush in the middle of the bowl, and give it a shake to properly cover the bristles in the bleach. Wipe down the outside of the toilet with a cloth and some sanitizing bathroom cleaner, and flush. The hope is that the bleach and the brush will get rid of any nasty bacteria that could be lurking in your toilet bowl. If you can, throw away the cloth that you used for the outside of the toilet, as it is more than likely to have something nasty on it by now!
When you have checked off the toilet, you can simply clean the mirrors and the windows with glass or window cleaner, in a side to side motion. Try to avoid too much liquid residue getting left on the mirrors, as they will only dry streaky, making things a lot harder for you in the long run! Once all above ground is cleaned, you can mop the floor, taking special care to get the area around the toilet bowl clean and fresh. It is essential that you mop last, as otherwise yo are just inviting other things to be frothed all over it after you have cleaned it. Replace all your products and you are done!
Visit also: http://www.cleanerscarpetcleaning.co.uk/HA4-home-cleaners/ruislip-domestic-cleaning-HA4.html
Leave a Reply